On May 10, Xiaomi officially released its new flagship phone – Xiaomi Mi Max.
There are three versions in total. The top version has a Snapdragon 652 chipset, 4GB of RAM and 128GB storage. There’s a 3GB/64GB option as well. The most affordable model uses the Snapdragon 650 instead and has 3GB of RAM and 32GB storage.
Xiaomi Mi Max uses a 6.44-inch screen. The screen is housed in a…
Recently, Meizu has released its new phone M3 note, the cell phone with metal body, fingerprint recognition and 4100mAh battery, priced at 799 Yuan.
In order to explore the internal workmanship and materials, Zealer has disassembled the phone.
Tools Required: screwdriver, tweezers, crowbar, sucker and guitar pick.
Remove the SIM card tray from its body.
Meizu M3 Note support for SIM1: Nano-SIM, SIM2/TF: Nano-SIM/T-card.
The front-end of the card tray…
Meizu M3 has a 5.0-inch screen with a resolution of 1280×720, it is comes with a MediaTek MT6750 (8xA53) processors, Mali-T860 GPU, memory available in two versions: 2GB 16GB and 3GB 32GB, with a 13MP rear camera and 5MP front camera, support PDAF phase focusing.
Remove the SIM card tray.
Remove two screws next to the MicroUSB port of the phone with a screw driver.
Using a suction cup and…
Meizu new flagship PRO 6 has officially started selling last week, this phone features a MediaTek Helixo X25 (MT6797T) processor, 4GB of memory, there are two versions of 32GB and 64GB options, the priced at 2499 Yuan and 2799 Yuan. It also includes a 5.2-inch Samsung 1080P screen, 10 LED ring flash and a 2560mAh battery, measure of 147.7 * 70.8 * 7.25mm.
Now, it168 has taken apart the phone,…
HP EliteBook 725 G3 uses the AMD PRO A12-8800B processor. It is also equipped with AMD Radeon R7 graphics card, with better graphics capabilities for general office needs.
HP EliteBook 725 G3 average thickness of less than 0.8 inches (2.03 cm) with a USB Type-C port, a DisplayPort port, a VGA port, two USB 3.0 ports, an SDXC card slot and an Ethernet interface, and a docking station for connecting…
In this guide, I will be taking apart Dell Precision 7710 workstations.
I will show how to upgrade RAM, SSD and hard drive.
Also, I will remove the keyboard, heat sink and cooling fan.
Make sure the laptop is turned off before you start the disassembly process.
1. Removing the battery and hard drive cover
The docking connector on the top of the case, the bottom is battery and hard…
In this post, I will show you how to disassemble Dell Precision 5510, I will remove the bottom case, RAM, SSD, battery, display assembly, cooling fan and motherboard. Refer to the guides to repair, upgrade and clean your Precision 5510.
Windows 10 Pro (64bit)
Intel Xeon Processor E3-1505M v5 (Quad Core 2.80GHz, 3.70GHz Turbo, 8MB 45W, with Intel HD graphics P5
16GB (2x8G) 2133MHz DDR4 Memory with ECC
In this post, I will show you how to disassemble Dell XPS 15 9550, I will remove the ram, SSD, battery, bottom case, cooling fan and motherboard. Refer to the guides to repair, upgrade and clean your XPS 15 9550.
Remove twelve screws securing the bottom case.
There are two screws under the little cover, open the cover and remove two screws.
The bottom case can be removed easily.
In this post, I will show you how to disassemble Lenovo Thinkpad T450, I will remove RAM, hard drive, bottom case, cooling fan and motherboard. Refer to the guides to repair, upgrade and clean your Thinkpad T450.
My target is add a M.2 SSD and a 4GB RAM for my Thinkpad T450.
Make sure the laptop is turned off before you start to take it apart.
CPU: Intel Core…
In this post, I will show you how to disassemble a Lenovo Thinkpad T550, I will remove the SSD, ram, hard drive, bottom case, cooling fan and motherboard. Refer to the guide to repair, upgrade and clean your Thinkpad T550.
My target is add a NGFF SSD, a 4GB RAM, remove the 2.5″ hard drive and replace it by a 2.5″ SSD for my Thinkpad T550.
Make sure the laptop…